Forum Replies Created
-
AuthorPosts
-
Michael HollingworthParticipant
Thanks Steve for you suggestion. I have a spring for the lazy block the sheet actually attached to the Genoa is 7mm the one in the photo is the old 8mm. Fingers crossed my cleats will arrive so I can test both your and Oliver’s theory’s. I post some photos and let you know.
Michael HollingworthParticipantThanks for your reply, it’s funny you mention a spring as I have ordered two from Allen to fit behind the drooping pulley.
I had a call from Pin & Bax who originally fitted out the boat but sadly have no record of the arrangement originally installed and suggested the newer hull have a totally different setup.
Thanks Again
Mike
Michael HollingworthParticipantView directly beneath the deck the cleat has been removed to allow access for photos. You can see where it bolts. Its a standard 38mm hole centre cleat.
Attachments:
You must be logged in to view attached files.Michael HollingworthParticipantView of the sliding car.
Attachments:
You must be logged in to view attached files.Michael HollingworthParticipantNo thank you Oliver I saw your very comprehensive reply. I have tried to upload photos showing my set up but still haven’t been able to. I have also contacted Pin Bax who completed the hull but I have had no reply. There is definitely something fundamentally wrong with the set up under the deck but I cannot find a photo of a setup on a Winder hull anywhere.
-
AuthorPosts