GP14 Sailing Forums Forum Forestay tension

Tagged: ,

Viewing 3 reply threads
  • Author
    Posts
    • #4256
      norman
      Participant

      I have sailed a Holt Speed Mk 2 for a few years but never got round to serious tuning.  I had the opportunity to borrow a Loos Rig tension gauge at the weekend so thought I would see how the boat should be set up.  Although the gauge is metric, I think my mental arithmetic is adequate to tell me that 400 lbs is off the scale.  Am I doing something wrong or do I need to hire a gorilla to assist with rigging?

    • #4261
      Mike Senior
      Participant

      Hi Norman,

      Assuming your wire is 3mm in diameter, I think 400lbs is just under mark “28”.

      – image from flying fifteen site.

      hope this helps.

      Mike

    • #4312
      norman
      Participant

      Thanks Mike, sorry for the delayed acknowledgement.  Perhaps I wasn’t looking carefully enough at the gauge, I could have sworn it didn’t read as high as the illustration.

      Norman

    • #4319

      Yes the PT-1M is metric ie kilograms..So 400 lbs = 181.44 kilograms  Had me stumped at first whilst setting the tension on the shrouds, we just don’t like reading instructions do we.Paul

Viewing 3 reply threads
  • You must be logged in to reply to this topic.